Glass is rocket science for high performance buildings

During a presentation at the South Pacific Passive House Conference in Christchurch (March 2017). I spoke on lessons learned from New Zealand projects. One of the biggest lessons we’ve learned is that windows are the rocket science in high performance buildings.  They are very advanced technology originally from the space industry and they can make […]

Continue reading

Fundamental of Building Science – The Building Enclosure and the Four Control Layers

Understanding of the building enclosure and the four control layers that make up the building enclosure is vital to understanding how the building enclosure will perform Enclosure The building enclosure is what separates the inside environment from the outside ‘natural’ environment. This includes from the paint on the outside of the wall cladding to the […]

Continue reading

How to estimate of the R-value of unconditioned spaces

Several Passive House projects undergoing certification have requested a way to estimate the additional R-value of an adjoining unconditioned spaces (such as garage). A good example is a garage which is part of the building but outside of the Passive House Thermal Envelope. This garage will increase the insulation value of the thermal envelope by […]

Continue reading

DHW Tanks – W/K from kWh/day

Summary The Passive House Planning Package (PHPP) requires that energy losses from Domestic Hot Water (DHW) Storage tanks be entered as Watts per degree Kelvin (W/K) rather than the more common KWh/day. This explains how to convert from kWh/day to W/K and some ways this can be more complicated than you would expect as you […]

Continue reading

How to scale HRV data to ERV for use in Passive House PlanningPackage

Summary Several Heat Recovery Ventilation (HRV) systems available have HRV performance data for the Passive House Planning Package (PHPP) but do not have Energy Recovery Ventilation (ERV) performance data. Knowing the performance is important for designing Passive Houses. A simple scaling is suggested to provide a first approximation. Method Looking at the PHPP version 9.3 […]

Continue reading

Hygiene Criterion applied to a thermal bridge

PH certification criteria requires that a minimum surface temperature be achieved. Steps: 1. Determine the exterior temperature to use – call this the Hygiene External Temperature. This temperature can be any value lower than the internal temperature. I typically use 0 °C as the Hygiene External Temperature and 20 °C as the interior temperature but […]

Continue reading